Omniprobe聚焦离子束载网FIB半分载网 Lift-Out Grids

The Omniprobe® Lift-Out Grids are specifically designed to accept the TEM lamellas milled out by FIB or SEM/FIB systems. Typical thickness of the grids is 25-30µm with a diameter of 3mm. The posts are designed for optimum access and provide a secure area for attaching (welding) the lamella(s). The Omniprobe grids fit standard TEM holders and provide a non-obscured view of the thin sections attached to the posts.

Deｓｃｒｉｐｔion	Unit
Omniprobe Lift-Out Grids, Cu with 3 posts	pkg/100
Omniprobe Lift-Out Grids, Cu with 3 posts, shallow downset	pkg/100
Omniprobe Lift-Out Grids, Mo with 3 posts	pkg/25
Omniprobe Lift-Out Grids, Cu with 3 posts and side access	pkg/100
Omniprobe Lift-Out Grids, Cu with 4 posts	pkg/100
Omniprobe Lift-Out Grids, Mo with 4 posts	pkg/25
Omniprobe Lift-Out Grids, Cu with 5 posts	pkg/100
Omniprobe Beryllium Half Ring Grids, Be	pkg/10
GSB-100 Storage Box for 100 Omniprobe grids, complete with base, lid and clips	each

FIB Grid Box for Lift-Out Grids or Half Grids

GSB-100 Storage Box for 100 Omniprobe grids, complete with base, lid and clips

Four position grid box with lid for holding FIB lift-out grids or half grids. The grid box cavity depth is only 1.7mm, thus preventing the grids from rotating in the diamond shaped cavity. The FIB grids can be relatively easily loaded/unloaded using sharp tweezers.

4 Position FIB Grid Box with Lid

each

(责任编辑：泉水)

搜索

热门标签:

Omniprobe聚焦离子束载网FIB半分载网 Lift-Out Grids